When wiring, first determine the size of submersible pump cable according to cable length. For example, if the pump is equipped with a cable of 10 square meters and 50 meters is required, the cable configuration should be increased by 16 square meters.

If the submersible pump is used where the supply voltage is slightly lower than that required by the sewage pump and the submersible pump cable is required to be long, the operating cable of the pump will be large for a long time. The motor of the sewage pump is very unfavorable. In this case, the sewage pump cable shall be equipped with YCW type or YC rubber sheathed soft cable. If not submerged in water, the YCW type is recommended.

The submersible sewage pump must select the matching pipeline according to the liquid medium to be transported. For example, liquids to be transported are corrosive. Therefore, the rubber parts outside the submersible pump cable must be made of stainless steel and corrosion-resistant submersible cable, otherwise the submersible cable will be corroded. A dangerous accident that leads to a spill.

If the submersible pump is used where the supply voltage is slightly lower than that of the sewage pump and the required cable length is longer, the submersible pump cable of the pump will be large for a long time. The motor of the sewage pump is very unfavorable. In this case, the sewage pump cable shall be equipped with YCW type or YC rubber sheathed soft submersible water pump cable. If not submerged in water, the YCW type is recommended.