This cable is suitable for all kinds of submersible motor wiring (from underwater to water). This product can be equipped with waterproof joint. The wiring produced by our company is easy to use and has good waterproof performance. Even if the cable is injured, it can still ensure that the submersible motor is not damaged by water. It is a new type of waterproof cable.

Good waterproof, wear-resisting, corrosion-resisting, high elasticity and bending resistance, tear resistance and aging resistance

1. The whole line is sealed, waterproof and anticorrosive, with a long service life, which can work for a long time in the water above 100 meters. 2. 3. Each sensor has a unique identification code and number to facilitate identification. 4. No correction, long - term high precision

Temperature range: 450℃, 500℃ for a short time. Application: this product is the wire and cable used in all kinds of electrical devices which need fire protection in special environment such as metallurgy, thermal engineering, petroleum, chemical engineering, natural gas and kerosene.

It maintains good bending performance in cold climate. The lowest cold resistance temperature of the cable is -60℃; The temperature of the cable for long-term operation in the outdoor environment is -60℃ ~ +40℃. The cable is allowed to be connected to the electrical equipment and disassembled under the conditions of the corresponding cold temperature grade. The connection and disconnection should be bent slowly, the bending radius should be 5 times of the diameter of the cable, and there should

The insulation of the cable is waterproof rubber; The cable is also filled with waterproof rubber; The cable sheath adopts waterproof rubber sheath, which is suitable for water treatment equipment such as submersible pump, coal mine, underwater operation and underwater view light lamp. |JHS waterproof cable for sewage pump anti-aging

Water pump special waterproof cable, high temperature resistant cable, flat cable, water pump special hot water cable, welding machine special cable, the hot water cable can withstand high temperature 120°

- high flexibility, bending resistance, oil resistance, flame retardant, waterproof, uv resistance, static electricity resistance, salt spray resistance, mould resistance - waterproof solution and microorganisms, oil resistance and coolant, radiation resistance, ozone resistance, weather resistance - acid and alkali resistance, solvent resistance, high abrasion resistance, scratch resistance, bending resistance, torsion resistance, anti-interference

The jacket is made of nitrile rubber with good mechanical performance, good oil resistance and strong chemical corrosion resistance, and the surface is required to have spline type outer flaps to prevent damage to the jacket during armor armor, and can also increase friction with interlock steel tape armor to balance longitudinal stress of interlock armor

20℃ conductor dc resistance meet IEC60228 standard (GB3956). 20 ℃ cable insulation resistance is not less than 5000 m Ω · km (insulation resistance than IEC60092-353 standard requirements constant performance indicators much higher). The flame retardant performance meets the requirements of iec60332-3-22 class A flame retardant (40 minutes for fire supply, carbonization height of cable shall not exceed 2.5m).

High temperature resistance, low smoke halogen-free, crosslinked irradiation, excellent insulation and electrical properties, improved flame retardant, aging resistance, high mechanical strength, environmental stress cracking resistance, etc